Télécharger Imprimer la page

Steba TO 20 Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

∙ This appliance is intended to be used in household and similar
applications such as:
o staff kitchen areas in shops, offices and others working
environments
o by clients in hotels, motels and other residential type en-
vironments
o bed and breakfast type environments.
∙ Before initial use: clean all parts carefully and leave to dry.
Heat up the device 2 – 3 times without toast to eliminate the
smell of newness.
Attention! Device gets hot. Danger of burns!
Touchable surfaces will be hot during operation! Place
the device on a flat and insensitive surface with and
keep a distance of at least 70cm to burnable materials.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm²
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hygiene: Please always clean the device to avoid bacteria and
mould formation.
10

Publicité

loading

Produits Connexes pour Steba TO 20