Télécharger Imprimer la page

Sunbeam SWM5251-CN Manuel D'instructions page 6

Publicité

TROUBLE
• Unit does not turn on.
• Refill/Reset light
illuminated.
• Mist output minimal to none. ☛ Scale buildup on heating element.
• Water Leaks from tank.
• Crack in Tank.
• Film on tank.
T R O U B L E S H O O T I N G
TROUBLESHOOTING
PROBABLE CAUSE
☛ Not plugged in.
☛ Outlet not functioning.
☛ Water Tank Empty.
☛ Unit not reset after refill.
☛ Scale buildup on heating element.
☛ Humidifier is not warmed up yet.
☛ Tank rubber ring is missing.
☛ Cap not tight enough.
☛ Tank water is Hot.
☛ Hot water will cause tank to
pressurize.
☛ Tanks will crack if hit or dropped.
☛ Mineral deposits.
SOLUTION
✔ Plug in unit.
✔ Have outlet replaced by a licensed electrician.
✔ Refill Tank.
✔ Follow manual for Reset Instructions.
✔ Remove scale from heating element.
✔ Remove scale from heating element .
✔ Allow 10 minutes for the humidifier to
warm up.
✔ Remove tank cap and replace or reposition
ring.
✔ Tighten the cap.
✔ Fill with cool water only.
✔ Fill with cool water only.
✔ Handle tank with Care.
✔ Clean/disinfect tank as instructed in
weekly cleaning instructions

Publicité

loading