Costway ES10150US Manuel De L'utilisateur page 3

EN
● TECHNICAL DATA
Item No. Voltage/frequency
ES10150US 110V-120V~60Hz
● MAINTENANCE OF AIR BLOWER
THE SOURCE OF ELECTRICAL SUPPLY MUST BE DISCONNECTED
PRIOR TO ANY SERVICING OR CLEANING.
1. USE A DRY CLOTH TO GENTLY CLEAN ALL SURFACES.
2. STORE IN A COOL ,DRY PLACE AND OUT OF CHIDREN'S REACH.
Troubleshooting
PROBLEM
Motor won't run
Motor runs but wheel
makes a scraping noise
Motor is unable to
run normally
04
Electric current(A)
4.1A
CAUSE
1. Switch not turned on.
2. The circuit is opened or it is poor
contact.
3. Electric capacity is damaged.
4. Choked up by hard objects.
1. Screws on the vaned wheel are
loose.
2. Foreign objects in air-blower.
1. The voltage is unstable.
2. Motor is affected with damp.
3. Electric capacity is failure.
4. The impeller is loose.
● ENVIRONMENTAL INFORMATION
Electrical and electronic equipment(EEE)contains
material, components and substances that may be
hazardous and harmful to human heath and
environment if waste electrical and electronic
equipment(WEEE)is not disposed of correctly.
Products marked with a crossed-out wheeled bin are electrical and
electronic equipment. The crossed-out wheeled bin indicates that
waste electrical and electronic equipment must not be disposed of
with unsorted household waste, but must be collected separately.
● GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This product is equipped
with a cord having a grounding wire with an appropriate
grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes
and ordinances.
WARNING – Improper installation of the grounding plug is able to
result in a risk of electric shock. When repair or replacement of
the cord or plug is required, do not connect the grounding wire to
either flat blade terminal. The wire with insulation having an outer
surface that is green with or without yellow stripes is the
grounding wire.
Substitution of the signal word "DANGER" for "WARNING" is not
prohibited when the risk associated with the product is such that a
situation exists which if not avoided will result in death or serious
injury.
Check with a qualified electrician or serviceman when the
grounding instructions are not completely understood, or when in
doubt as to whether the product is properly grounded. Do not
modify the plug provided; if it does not fit the outlet, have the
proper outlet installed by a qualified electrician.
EN
05