Dacor DRF36C700 Serie Mode D'emploi page 43

More Options
* applicable models only
NOTE
Using Power Cool or Power Freeze increases power consumption.
Dacor_RF9000A_DA68-04023L-00_EN.indd 43
You can change the settings for the following functions. Tap
to select the menu, and then tap
UV Deodorizing Filter *: You can turn the UV Deodorizing Filter
on or off.
Peak Demand *: You can turn the Peak Demand function on or off.
(For more information on Peak Demand function, see the SMART
GRID Function (Demand Response) (Applicable models only)
section on page 48.)
Filter Reset *: When you get the filter replacement message on
the display, select this menu, and replace the filter according to
onscreen instructions.
Temp. Unit: You can set the temperature scale to Celsius or
Fahrenheit.
Door Alarm: You can turn on or off the Door Alarm.
Wi-Fi Connect: You can turn on or off the Wi-Fi Connect. Turn it
on to control and monitor your refrigerator on the SmartThings
app. (For more information on SmartThings, see the SmartThings
section on page 45.)
to confirm.
English 43
or
2021-03-30 6:23:36