Dynex DX-LCD32 Guide De L'utilisateur page 6

6
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch and
the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
RF switch
A
B
Out
TV
Cable converter/descrambler box
Connecting to an external signal source
You can connect a DVD, VCD, VCR, or STB using a
variety of methods, including composite cables,
component cables, an S-Video cable, or an HDMI
cable. The S-Video cable does not carry sound. If you
use an S-Video cable, you need to use audio cables
to connect the audio output.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your VCR
has an S-Video connection.
To connect an external signal source:
1 For composite video—Plug the audio/video
cable into the AUDIO L, AUDIO R, and VIDEO in
jacks on the back of your TV.
- OR -
For S-Video—Plug in the audio cables as
described above, then plug one end of an S-Video
cable into the S-Video jack on the back of your TV
and the other end into the S-Video jack on
external signal source.
- OR -
For component video—Plug the Y, Pb, and Pr
video cables and the Audio L and Audio R cables
into the component input jacks.
- OR -
For HDMI—Plug one end of an HDMI cable into
the back of the TV and the other end into an HD
DVD player.
2 Turn on your TV.
3 Press the INPUT button repeatedly to select the
external signal source you want to watch.
4 Turn on external signal source.
5 Insert a disc or videotape into the external signal
source, then press the PLAY button.
Two-set signal splitter
In
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
TV
Composite Out
HDMI2 HDMI1 SPDIF
Video
Video
Connecting a computer
Warning
Make sure that you turn off and unplug your TV
before installing devices.
To connect a computer:
1 Plug a VGA cable from your computer into the
VGA jack on the back of your TV.
2 Plug an audio cable from your computer's audio
out jack into the AUDIO jack on the back of your
TV.
3 Plug in and turn on your TV.
4 Press the INPUT button repeatedly to select the
VIDEO5 input source, then press PC to toggle
from HDMI to VGA.
TV
Audio
cable
Setting up your TV
Component 1
L R L R Y Pb/Cb Pr/Cr
L R L R Y Pb/Cb Pr/Cr
RS-232
RS-232 (for
service)
AUDIO VGA
VGA cable