LG LB69 Serie Mode D'emploi page 9

3
4
Screw Cover
CAUTION
y When attaching the sound bar supporter
to the TV set, place the screen facing
down on a cushioned table or flat surface
to protect the screen from scratches.
y Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
y The sound bar supporter only uses for
wall mounting.
y Remove the sound bar supporter before
installing the stand by performing the
stand attachment in reverse.
y The Screw Cover will protect the opening
from accumulating dust and dirty.
Tidying cables
Image shown may differ from your TV.
1 Gather and bind the cables with the cable
holder. (Depending on model)
2 Fix the Cable Management firmly to the TV.
(Only 32LB65**-ZA)
4EA
M4 x L14
(Only LB63**-ZA, 39/42/47/50/55/60LB65**-ZA,
LB67**, LB68**, LB69**, LB72**, LB73**-ZA)
SETTING UP THE TV
NOTE
Cable Management
Cable Holder
Cable Management
A-9