Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LOG TH43
5. CONNECTION TO INSTRUMENT/CONTACTS
The log/temp transducer connects to the Nexus Server or directly to the Nexus Speed Log.
The transducer cable is clearly marked with No 1 and the colours will correspond to input screw
terminal on the Server.
If the 8 m transducer cable needs to be cut, use the extra cable protectors supplied. Press the
protectors on to each wire with a pair of flat pliers.
6. CALIBRATION
Calibration is carried out in the Multi Control instrument or the speed log instrument (see manual).
7. TECHNICAL DATA
Dimensions:
Transducer cable:
Power suppIy:
Power consumption: 0,06 W
Accuracy:
Speed range
Temperature range
Through-hull fitting 42 x
86 mm (1 5/8" x 3 3/8")
Hull thickness min 6 mm
(3/8"), max 42 mm (1 5/8")
8 m (26.2 ft)
12V DC (10-16V)
± 1%
0.2-30 knots (depending on transducer type max. 90 knots)
Operating -10ºC to +70ºC
Storage -35ºC to +70ºC
10-7
English
Svenska
Publicité
Chapitres
Table des Matières
