Publicité
Les langues disponibles
Les langues disponibles
USE
Device overview
1 - ON/OFF
4 - microUSB IN
Operation
1. Function key
By briefly pressing the key, the current battery status is displayed through the LED lights and the
Powerbank is activated.
If no device is connected to the Powerbank, or the connected device is fully charged, the
Powerbank changes automatically into standby mode after a time interval of approx. 5 seconds.
2. LED Status display
The individual LEDs display the remaining energy of the Powerbank:
% - Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected Devices
a) Charging the Powerbank
You can charge the Powerbank via the supplied microUSB cable, the supplied USB A to Type C
cable or via both cables simultaneously.
I. microUSB IN
Connect the supplied microUSB cable with the microUSB port (microUSB In) of the Power-
bank and connect the other end of the USB cable with a standard USB port of a computer
or USB power supply. The required charging time of the Powerbank is dependent on the
selected charging source and its output power (max. 5V / 2.1A).
2 - Status LEDs
5 - USB 2 OUT
LED 1
LED 2
EN - Page 3 of 8
3 - USB 1 OUT
6 - Type C IN/OUT
LED light
LED 3
LED 4
Publicité
