Page 2
Rough In - Constant Heating System STEP 1 Rough-in Requirements for Constant Circulation Heating System (see figure 1) Figure 1 Using this installation method, the towel warmer is controlled using the valves attached to the towel warmer, and can be operated independently from the heating system.
Page 3
Rough In - Dedicated Heating System STEP 1 Rough-in Requirements for Dedicated Circulation Heating System (see figure 2) Figure 2 Using this installation method, the towel warmer is controlled using the thermostat wired to the circulator pump, and cannot be operated independently from the heating system.
Page 4
Towel Warmer Installation Procedure STEP 2 Installation Instructions (see figure 3) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit. Read all instructions before continuing. 2. Fix wall supports “B” including collar “A” to the wall using the screws provided and in locations as shown on figure 2. 3.
Page 5
Technical Drawing Wall Rough In 500mm 11/16 Figure 4 Towel warmer contains a non-toxic heat transfer solution, an Ø22mm anti-rust inhibitor and 55/64 Ø 70mm an anti-freeze Figure 5 23/4 in 120mm 423/32 in 4 mounting brackets located at back 80mm of towel warmer 35/32 in...
Page 6
Wall Rough In Weight Output Metal Model # Description Finish (lb) (BTU) (mm) (Inches) Type Ortona H91103 Hydronic Chrome 500 x 940 19.5” x 37” Mild Steel Ortona H91105 Hydronic Matte Black 500 x 940 19.5” x 37” Mild Steel...
Page 7
Technical Drawing Floor Rough In 500mm 11/16 Figure 7 Towel warmer contains a non-toxic heat transfer solution, an Figure 8 Ø22mm anti-rust inhibitor and 55/64 Ø 70mm an anti-freeze 23/4 in 120mm 423/32 in 4 mounting brackets located at back 80mm of towel warmer 35/32 in...
Page 8
Floor Rough In Weight Output Metal Model # Description Finish (lb) (BTU) (mm) (Inches) Type Ortona H91103 Hydronic Chrome 500 x 940 19.5” x 37” Mild Steel Ortona H91105 Hydronic Matte Black 500 x 940 19.5” x 37” Mild Steel...