Page 2
Rough In - Constant Heating System STEP 1 Rough-in Requirements for Constant Circulation Heating System (see figure 1) Figure 1 Using this installation method, the towel warmer is controlled using the valves attached to the towel warmer, and can be operated independently from the heating system.
Page 3
Rough In - Dedicated Heating System STEP 1 Rough-in Requirements for Dedicated Circulation Heating System (see figure 2) Figure 2 Using this installation method, the towel warmer is controlled using the thermostat wired to the circulator pump, and cannot be operated independently from the heating system.
Page 4
Towel Warmer Installation Procedure STEP 2 Installation Instructions (see figure 3) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit. Read all instructions before continuing. 2. Fix wall supports “B” including collar “A” to the wall using the screws provided and in locations as shown on figure 2. 3.
Page 5
Technical Drawing Wall Rough In Towel warmer contains a non-toxic heat 600mm transfer solution, an Figure 5 anti-rust inhibitor and Figure 4 an anti-freeze 100mm 15/16 175mm 57/64 4 mounting brackets located at back of towel warmer 30mm x 30mm 3/16 3/16 20mm x 40mm...
Page 6
Weight Output Metal Model # Description Finish (lb) (BTU) (mm) (Inches) Type Vasto H92403 Hydronic Chrome 600 x 1210 23.5” x 47.5” Mild Steel Vasto H92405 Hydronic Matte Black 1500 600 x 1210 23.5” x 47.5” Mild Steel Thermostatic Angle...
Page 7
Technical Drawing Floor Rough In Towel warmer contains 600mm a non-toxic heat transfer solution, an anti-rust inhibitor and Figure 7 an anti-freeze 100mm Figure 8 15/16 175mm 57/64 4 mounting brackets located at back of towel warmer 30mm x 30mm 3/16 3/16 20mm x 40mm...
Page 8
Floor Rough In Weight Output Metal Model # Description Finish (lb) (BTU) (mm) (Inches) Type Vasto H92403 Hydronic Chrome 600 x 1210 23.5” x 47.5” Mild Steel Vasto H92405 Hydronic Matte Black 1500 600 x 1210 23.5” x 47.5” Mild Steel Thermostatic...