Télécharger Imprimer la page

Flama 2203 FL Mode D'emploi page 16

Publicité

Les langues disponibles

Les langues disponibles

when removing the blade from the jar,
emptying the jar and during cleaning.
- Always use the appliance with its lid in
place. Do not remove the mini-lid or lid
before the blades come to a complete
stop.
- When blending hot liquids, remove the
mini-lid.
- This appliance was designed for a
maximum use of 3 minutes, when this
limit is exceeded, allow for a cooling
period before using it again to prevent
the engine from overloading.
- The appliance must not be used if it's
not working properly. If it is in any way
damaged, for example, on its power
cord or plug, immediately take it to an
authorized Flama Technical Repair
Service. Any action apart from cleaning
must be performed solely by
authorized FLAMA Technical Repair
Services.
- This product complies with the Low
Voltage Directive - 2006/95/EC and
Electromagnetic Compatibility Directive
- 2004/108/EC.
Wiring instructions for U.K. and Ireland only:
APPLIANCES WITH FITTED PLUG
Important: For your convenience, this appliance is supplied complete with a plug
incorporating a 13-amp fuse.
In the event of replacing a fuse in the plug supplied, a 13-amp fuse approved by ASTA
to BS1362 must be used.
If the socket outlets are not of the 13ABS 1363 type, and therefore do not accept the
plug connected to this appliance, cut off the plug. When cut off, this plug is a shock
hazard if inserted into a socket outlet and must therefore be disposed of safely.
If the fuse cover is detachable, never use the plug with the cover omitted. Replacement
covers can be obtained from your service agent.
Fit the appropriate plug according to the instructions in paragraph "Fitting a plug". With
alternative plugs a 15-amp fuse must be fitted either in the plug or adaptor or at the
main fuse box.
14

Publicité

loading

Produits Connexes pour Flama 2203 FL