Télécharger Imprimer la page

JVC RA-F223B Manuel D'instructions page 47

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Alarms
See chapter "Setting alarms".
DRC (Dynamic Range Control) (DAB+ mode only)
Use this option to add or remove a degree of compensation for the differences in the dynamic
range between radio stations. Select one of the options below.
 DRC off: No compensation applied
 DRC low: Medium compensation applied
 DRC high: Maximum compensation applied
Prune (DAB+ mode only)
Use this option to remove any stations that are in the list but have no service in your area. Select
"Yes" to confirm the removal.
Factory Reset
This setting clears all user-defined settings and replaces them with the original default settings.
Select "Yes" to confirm factory reset.
Software Version
This option displays the current software version.
RESTTING THE UNIT
If the system does not respond or exhibit erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, disconnect the AC power adaptor from
the wall socket. Wait at least 3 minutes, and re-attach the AC cord to the wall outlet. The unit is now
reset, and you will need to set up the unit time and alarm again.
CARE AND MAINTENANCE
 Clean the radio with a soft damp cloth and let all parts dry completely after cleaning.
 Do not use any aggressive cleaners, brushes with nylon bristles, sharp or metallic cleaning
utensils, knives, scrapers and the like. They could damage the surfaces of the radio.
 Do not immerse the radio in water and do not let water getting into the housing of the radio.
SPECIFICATIONS
Radio frequency range
USB charging output
FM: 87.5 – 108 MHz
DAB: 174.928 – 239.200 MHz
DC 5.0V
1A
EN-8

Publicité

loading