JVC RA-F223B Manuel D'instructions page 45

SETTING ALARMS
The radio lets you have 2 alarm settings.
To set the alarm:
1. Press the ALARM button to select between Alarm 1 and Alarm 2 and then press the SELECT
button to confirm the selection.
2. Press the < or > button to select alarm "ON" and then press the SELECT button to confirm the
selection.
3. Repeatedly press the < or > button to set the hour time of the alarm and then press the SELECT
button.
4. Repeatedly press the < or > button to set the minute time of the alarm and then press the
SELECT button.
5. Repeatedly press the < or > button to cycle through the alarm frequency options and then press
the SELECT button to confirm the selection.
The alarm frequency defines how often the alarm is active.
Frequency options: Daily, Once, Weekends and Weekdays. If "Once" is selected, you will also be
prompted to set a specific date.
6. Repeatedly press the < or > button to cycle through the source options and then press the
SELECT button to confirm the selection.
The source defines the sound source of the alarm.
Source options: DAB+, FM and Buzzer. If DAB+ or FM is selected, the last played station will be
used as the alarm.
7. Repeatedly press the < or > button to adjust the volume level and then press the SELECT
button.
This setting defines the volume of the alarm. The alarm setting is now saved.
When the alarm setting is active (ON), the corresponding alarm icon (1 or 2) shows on the display.
At the set time, the alarm will sound. The volume will increase gradually until it reaches the set
volume level. The corresponding alarm icon will flash on the display.
Turning off the alarm settings
1. Press the ALARM button to select between Alarm 1 and Alarm 2 and then press the SELECT
button to confirm the selection.
2. Press the < or > button to select alarm "OFF" and then press the SELECT button to confirm the
selection.
When the alarm setting is deactivated (OFF), the corresponding alarm icon (1 or 2) turns off on the
display.
Deactivating a sounding alarm
Press the POWER button to deactivate a sounding alarm.
Snooze
To temporarily silence a sounding alarm, press the SNOOZE button. The snooze period is 9

minutes.
The radio will return to standby mode during the snooze period. The alarm will sound again

when the snooze period is over.
To cancel the snooze period and the alarm, press the POWER button.

EN-6