Hoover H-PURIFIER 500 HHP55CA011 Manuel D'utilisation page 6

GB
14 Air Quality LED Ring
15 Power Button
16 Child Lock Button
17 Digital Display
18 Information Button
Multi Sensor Monitoring System
Thanks to the Multi Sensor Monitoring System your product will continuously monitor the indoor air condition in terms of PM10, PM2.5, Volatile
Organic Compounds (GAS), and Carbon Monoxide concentration (CO).
Each time you switch your product on, the Multi Sensor Monitoring system will start analyzing the indoor air and the Air Quality LED Ring will
illuminate with different colors representing real time air quality conditions.
Air Quality
LED Ring Colour
GREEN
YELLOW
ORANGE
RED
Carbon Monoxide Concentration Monitoring and Alarm
The H-Purifier will constantly monitor the indoor air for Carbon Monoxide (CO). The product is equipped with an alert system.
When the Carbon Monoxide alarm is activated, the AIR Quality LED Ring, Infomation & CO Alert button will flash red simultaniously and an
audible alarm will sound. The alarm will remain in operation until the Carbon Monoxide (CO) concentration has reduced to below 50 ppm unless
silenced manually by pressing the CO Alert Button for 3 seconds.
This CO Alert LED shows the working condition of the CO sensor. It appears in green color when the CO sensor is in normal condition, in yellow
color when the sensor is malfunctioning or exceeds its working life.
You can test if the alarm is working properly by pressing the CO Alert Button for 3 seconds, and a loud buzzer sound will last for 5 seconds if the
alarm works properly.
6 6
19 Sleep Mode Button
20 Auto Mode Button
21 Pollen Allergy Circle Lamp
22 Pollen Allergy Lamp
23 Diffuser Button
Indoor
Air Quality
EXCELLENT
SATISFACTORY
POOR
VERY POOR
24 Max Mode Button
25 CO Alert Button & LED
26 Light Control Button
27 Wi-Fi Button