Publicité
Mount the protection cap
Protection cap must be tightened
!
proper
with
torque to avoid loosing
IP protection
3
!
The following versions of the luminaires should be positioned so that
prolonged staring into the luminaire at a distance closer than the indicated
value in the table is not expected!
All other standard luminaire types classified to Risk Group 1.
Aisle orientation for
High Rack Optic (HRO)
Inrush current
I mains (A)
I max
max/2
Tref
!
The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE regulations or the national requirements.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
During the installation or maintaining the luminaire please use gloves to avoid spots on the cover
To remove dirt spots use the following:
- Dust: use micro fiber cloths
- Fingerprints, etc. : use a cleaner for with antistatic properties.
Imax (A)
Tref (μs)
MCB
B-10 A
B-16 A
I nom.
C-10 A
C-16 A
Time (us)
5/9
Tightening torque
1 Nm
BY480P/X
BY481P/X
LED130S,
LED250S
LED170S
LED350S
Electrical characteristics
5,1
17,7
2300
162
No. of driver max.
8
17
12
22
12
28
20
36
15,3
61
5
8
8
13
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Publicité
