Publicité
Les langues disponibles
Les langues disponibles
User manual electronic lock
5. Power supply
5.1 Changing the battery
As soon as the battery is almost empty (and the voltage becomes too low), the red light will flash 5
times and a warning signal will sound several times when the door is opened. This is the warning that
you need to change the battery.
The pull-out Battery Holder is located behind the keyboard housing.
- Remove the screw at the bottom of the battery box.
- Squeeze the sides together and pull the battery box down.
Do not use rechargeable batteries, only high-quality 9V Duracell
batteries.
Do you have questions about your safe, the electronic lock or is there an unexpected malfunction?
Please contact us for further assistance.
36
Disconnect the battery from the contacts, on the right
side
- Remove the battery and replace it with a new
Duracell alkaline battery (9V)
- Replace the battery holder and screw it to the
bottom of the case
Publicité
