Makita EE400MP Instructions D'emploi D'origine page 3

Approved power unit
This attachment is approved to use only with the following power
unit(s):
EX2650LH Multi function power head
BUX360, BUX361, BUX362, UX360D, UX361D, UX362D, DUX60,
DUX18, UX01G
Cordless multi function power head
WARNING:
Never use the attachment with non-approved power unit.
Non-approved combination may cause serious injury.
Part description
2
5
4
The numbers below refer to the figure.
1. Shaft
2. Blade case
3. Wheel
4. Gear case
5. Blade
Safety precautions
WARNING:
Read all safety warnings and all instructions in this booklet
and the instruction manual of the power unit. Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "edger" and "equipment" in the warnings and precautions
refer to the combination of the attachment and the power unit.
The term "motor" in the warnings and precautions refers to the
engine or electric motor of the power unit.
Intended use
• This equipment is only intended for edging the lawn in
conjunction with an approved power unit. Never use the
attachment for the other purpose. Abusing the attachment may
cause serious injury.
General precautions
• Before starting the equipment, read this booklet and the
instruction manual of the power unit to become familiar with the
handling of the equipment.
• Do not lend the attachment to a person with insufficient
experience or knowledge regarding handling of the equipment.
• When lending the attachment, always attach this instruction
manual.
• Do not allow children or young persons under 18 years old to use
the equipment. Keep them away from the equipment.
• Handle the equipment with the utmost care and attention.
• Never use the equipment after consuming alcohol or drugs, or if
feeling tired or ill.
1
3
• Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their property.
• Never attempt to modify the attachment.
• Follow the regulations about handling of the equipment in your
country.
Personal protective equipment
• Wear safety helmet, protective goggles and protective gloves to
protect yourself from flying debris or falling objects.
• Wear ear protection such as ear muffs to prevent hearing loss.
• Wear proper clothing and shoes for safe operation, such as
a work overall and sturdy, non-slip shoes. Do not wear loose
clothing or jewelry. Loose clothes, jewelry or long hair can be
caught in moving parts.
• When touching the cutting blade, wear protective gloves. Cutting
blades can cut bare hands severely.
Work area safety
• Operate the equipment under good visibility and daylight
conditions only. Do not operate the equipment in darkness or fog.
• Start and operate the engine only outdoors in a well ventilated
area. Operation in a confined or poorly ventilated area can result
in death due to suffocation or carbon monoxide poisoning.
• During operation, never stand on an unstable or slippery surface
or a steep slope. During the cold season, beware of ice and snow
and always ensure secure footing.
• During operation, keep bystanders or animals at least 15 m
away from the equipment. Stop the motor as soon as someone
approaches.
• Before operation, examine the work area for stones or other solid
objects. They can be thrown or cause dangerous kickback and
result in serious injury and/or property damage.
• WARNING: Use of this product can create dust containing
chemicals which may cause respiratory or other illnesses.
Some examples of these chemicals are compounds found in
pesticides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Putting into operation
• Before assembling or adjusting the equipment, switch off the
motor and remove the spark plug cap or the battery cartridge.
• Before handling the cutter blade, wear protective gloves.
• Before starting the motor, inspect the equipment for damages,
loose screws/nuts or improper assembly. If the cutter blade
is bent or damaged, replace it. Check all control levers and
switches for easy action. Clean and dry the handles.
• Never attempt to start the motor if the equipment is damaged or
not fully assembled. Otherwise serious injury may result.
• Adjust the shoulder harness and hand grip to suit the operator's
body size.
3