Functional Description; Carton Contents - Biesemeyer T-Square BC30 Manuel D'utilisation

FOREWORD
The Biesemeyer T-Square
®
guide tube along with the mounting hardware for assembling the fence system to many different types of table saws.
Depending on the model ordered, an accessory leg kit may also be included. An accessory right extension table and
support legs are also required. The right extension table may be purchased seperately or may be constructed by
following the diagram in this manual. If the leg kit is not included with the fence, it may be ordered seperately as well.
IMPORTANT: The Biesemeyer
extension table and leg kit.
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
UNPACKING AND CLEANING
Carefully unpack the B
iesemeyer
items supplied with the guide set. Fig. 2 illustrates all the items supplied in the fence box and the accessory right hand
extension table. Support legs shown are only provided with Part No. 78-200. NOTE: If you did not purchase the right
extension table for use with your T-s
for information on constructing an extension table.

FUNCTIONAL DESCRIPTION

Commercial fence system includes the fence assembly, front rail, rear rail and front
®
T-Square® Commercial fence system is designed to be used only with a supporting
®

CARTON CONTENTS

T-s Commercial fence system from the shipping cartons. Fig. 1 illustrates all the
® ®
quare
fence system, refer to the next section titled "Constructing Extension Table"
®
quare
2
1
1. Guide Tube
2. Front Rail
3. Rear Rail
FIG. 1
4
3