Publicité
1
Open the cap and pick up
all parts from the inside of
drum.
2
Assemble the plates to the drum from inside to outside, fixed by
M6 nuts.
Alternate installation of plates (w/5 nails) and plates (w/4 nails) for
GT4129, fixed by M6 nuts and tighten it.
Alternate installation of plates (w/6 nails) and plates (w/5 nails) for
GT4130, fixed by M6 nuts and tighten it.
06
3
Close the cap !!!
Assemble the brackets to
the drum, fixed by large
washers and cotter pins.
4
Assemble the lower
handle to the brackets,
fixed by 2 bolts
M8x45mm, washers
and nuts.
07
Publicité
