Publicité
Les langues disponibles
Les langues disponibles
Changing the Pen Battery
•
D
O NOT USE REMOVE THE TIP OF THE PEN TO REPLACE THE
BATTERY
.
PEN
•
T
HERE IS A RISK OF EXPLOSION IF THE BATTERY IS
REPLACED BY AN INCORRECT TYPE
BATTERIES IN ACCORDANCE WITH LOCAL INSTRUCTIONS
The pen contains a AAAA-battery. Before proceeding, be sure
to have a new battery available.
1
Remove the rear Pen Cap (Figure 26).
2
Remove the battery from the pen barrel.
3
Insert the new battery into the pen barrel in the same orientation
as the one that was removed.
4
Close the rear Pen Cap.
Replacing the Pen Tip
With use, the pen tip may become worn or may pick up
foreign particles that can scratch the screen. A damaged or
worn tip may not move freely, causing unpredictable results
when using the pen. If a problem like this should occur, you
should replace the pen tip.
1
Pull the tip from the barrel.
2
Using one of the new tips that were supplied with your pen,
insert the pointed end of the tip into the barrel and push it in
firmly until it is in place
;
REMOVE ONLY THE CAP ON THE REAR OF THE
. D
ISPOSE OF USED
53 - Touchpad/Active Digitizer/Touchscreen
Pen Cap
.
Pen Barrel
Figure 26. Replacing the Battery
Pen Tip
1
Figure 27. Replacing the Pen Tip
AAAA-battery
Publicité
