product on a direct power source.
• Risk of short-circuiting. Never use
sockets that do not match the
product's power voltage. Before
using the product, check the voltage
on the unit's rating plate. Only
connect the product to sockets
that match the product's voltage.
If you are not sure whether your
connections meet the requirements,
consult an electrician or your
electricity supplier.
• Risk of short-circuiting. Never
connect any other device with high
power consumption to the same
group. Limit the use of high power
consumption products connected to
the same group.
• Risk of short-circuiting. Never locate
the product immediately below
a power outlet. The product may
become hot while in use. Always
keep the area above the product
free from objects and power outlets.
• Risk of short-circuiting. Never
use the product in a humid
environment. Always use the
product in a clean and dry
environment.
NOTICE
• Risk of damaging the product. Never
use the product near heat sources.
Keep the product away from heat
sources.
• Risk of damaging the product. Never
use the product in direct sunlight.
Direct sunlight may damage the
housing of the product.
• Risk of damaging the product. Never
pull the power cord to disconnect it
from the socket. Always grasp the
plug and pull.
• Risk of damaging the product.
Remove all the packaging material
before assembling or using the
product. Leaving packaging
material on the product may cause
melting of the packaging material
and sticking to the product.
• Risk of damaging the product.
Never mount the product on the
wall with the floor stands placed on
the product.
11