RISCO Group VUpoint RVCM32W Guide D'installation page 19

To define camera trigger settings:
1. From the Control Panel Cameras page, click the Triggers tab, the Camera
Triggers List page is displayed.
2. Click Add Trigger; the Add Triggers dialog box appears.
3. Define the following fields in the Add Trigger dialog box:
Field Description
Label Enter a name for the camera trigger
Camera Choose a camera from the list
Event Type
Choose an event type from the list
Event Choose the event from the list, e.g.
alarm, duress, etc.
Figure 17 Camera Triggers List
Figure 18 Add Trigger
17
Event Type
Partition and Detector events
Partition and Detector events
Partition and Detector events
Partition and Detector events