Publicité
Les langues disponibles
Les langues disponibles
Um Transportschäden zu verhinderen, wird die Maschine
in einer soliden Verpackung geliefert. Die Verpackung
besteht weitgehend aus verwertbarem Material. Benutzen
Sie also die Möglichkeit zum Recyclen der Verpackung.
Bringen Sie bei Ersatz die alten Maschinen zu Ihren ört-
lichen BORT GLOBAL LIMITED-Vertagshändler. Er wird
sich um eine umweltfreundliche Verarbeitung ïhrer alten
Maschine bemühen.
Geräusch-/Vibrationsinformation
Gemessen gemäß EN 60745-2-11 beträgt der Schalldruck-
pegel dieses Gerätes 89 dB(A) und der Schalleistungspegel
101,1 dB(A) (Standard- abweichung: 3 dB), und die Vibrati-
2
on 7,9 m/s
(Hand-Arm Methode).
Konformitätserklärung
Wir erklären in alleiniger Verantwortung, daß dieses
Produkt mit den folgenden Normen oder normativen
Dokumenten übereinstimmt: EN 60745-1, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3, gemäß den
Bestimmungen der Richtlinien 2006/42/EG, 2006/95/EG,
2004/108/EG, 2011/65/EU.
English
Air blower
Intended Use
The product is indented for blowing leaves, garden waste
such as grass, twigs and pine needles.
Technical specifi cations (fi g. 1)
Product elements (fi g. 2)
1. On/Off switch with speed control
2. Switch locking button
3. Wheel for adjusting speed
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your main-
soperated (corded) power tool or battery-operated (cord-
less) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of fl ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodifi ed plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected sup-
ply. Use of an RCD reduces the risk of electric shock.
5
Publicité
