Publicité
Les langues disponibles
Les langues disponibles
FAN STRUCTURE
1
3
2
18
22
INSTALLATION
1.
Loosen the locking lever (17) from the tube and remove the washer (16).
2.
Slide the pedestal cover (14), the weight adjuster (15) and the washer over the tube and fix the parts onto the
tube with the locking lever (17).
3.
Loosen the tube adjustment button (13) to extend the tube.
4.
Place the motor housing (11) onto the tube.
5.
Tighten the fixing screw of the motor housing (19) against its designated location (20).
6.
At the other side, tighten the adjustable tilt button (18) into the pedestal.
7.
Place the carry bolt (22) in the hole under the adjustable tilt button (18).
8.
Fix the carry button for the motor housing (21) onto the carry bolt (22).
9.
Place the protective rear cover (6) with the handle (7) upwards over the motor shaft (8) and then tighten it to
the motor housing using the 4 screws (5).
10.
Slide the fan blades (3) over the motor shaft (8) and fix them to the motor shaft using the fixing screw (4).
11.
Turn the clips of the protective front cover (1) outwards and hang the protective cover over the edge of the
protective rear cover. Make sure that the opening at the bottom of the protective front cover is aligned with
the opening at the bottom of the protective rear cover (2).
12.
Insert the screw through both openings at the bottom of the protective covers (2) and fix the covers together
using the nut.
13.
Finally, close the clips around both protective covers.
6
7
5
4
19
20
14
21
15
16
1. Protective front cover
10
2. Protective covers fixing screw location
9
8
3. Fan blades
4. Fan blade fixing screw
11
5. Protective rear cover fixing screws
6. Protective rear cover
7. Carry handle
8. Motor shaft
12
9. Speed setting dial
10. Oscillation button
13
11. Motor housing
12. Tube
13. Tube length adjustment button
14. Pedestal cover
15. Pedestal weight adjuster
16. Washer
17. Locking lever
18. Adjustable tilt button
19. Motor housing fixing screw
20. Location for motor housing fixing
screw
21. Motor housing carry button
22. Carry bolt
17
8
Publicité
