Citizen CT-S280 Mode D'emploi page 28

Switch No.
Memory SW7-1 Baud Rate
Memory SW7-2 Data Length
Memory SW7-3
Memory SW7-4
Memory SW7-5 Flow Control
Memory SW7-6 Reserved
Memory SW7-7 Reserved
Memory SW8-1 Reserved
Memory SW8-2 Paper Type
Memory SW9-1 Code Page
Memory SW9-2 Int' char Set
Memory SW9-3
Memory SW9-4 JIS/Shift JIS
Memory SW10-1 Print Density
Memory SW10-2 Print Speed
Memory SW10-3 Reserved
Memory SW10-4 Reserved
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of
three actions: pressing the FEED switch, pressing and holding the FEED switch,
and opening or closing the paper cover.
1. Entering memory switch setting mode.
Set paper to the printer and keep the printer cover open. With the FEED
switch pressed and held, turn the printer power on, and then press the
FEED switch twice. Close the cover. If the current settings of the memory
switch etc. are printed, the printer is now in the memory switch setting
mode.
Memory SW (1) 00000000
Setting Default
9600 bps
8bits
Stop Bit 1bit
Parity NONE
DTR/DSR
−
−
−
1 Color Normal 1 Color Normal, 2 Color Normal
PC437
U.S.A
Kanji OFF
JIS
100%
Level 9
−
−
(No indication for 0/1 with memory switch ranging from 7 to 10.)
1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps, 57600 bps, 115200 bps
7bits, 8bits
1bit, 2bits
NONE, EVEN, ODD
DTR/DSR, XON/XOFF
−
−
−
PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/
Space page/PC864/Thai Code 18
U.S.A, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea
ON, OFF
JIS, Shift JIS
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
−
−
— 23 —
Set Values
0: OFF state
1: ON state