Philips Lumea BRI940/00 Mode D'emploi page 15

5 Press the device firmly onto your skin and hold it in place.
The integrated safety system prevents unintentional flashing without full
skin contact.
6 Confirm that the 'READY to flash' light lights up white to ensure that there is
full contact with your skin.
-
If the 'READY to flash' light is orange, your skin is too dark to treat. Try
Lumea on a lighter body area.
7 Try each setting on your skin and find your comfortable setting.
If the flash feels uncomfortable and you experience pain, lower the setting.
-
When the 'READY to flash' light is white, press the flash button on the
handle once, to treat one spot with setting ➀.
The device makes a soft popping sound. The flash gives you a warm
sensation.
• You will see a flash of light.
Note: You can toggle through the light intensity settings by pressing the
toggle button.
-
Move to next area. Treat one spot with setting ➁
-
Move to next area. Treat one spot with setting ➂
1
-
Move to next area. Treat one spot with setting ➃
2
-
Move to next area. Treat one spot with setting ➄
3
4
5
English
15