Hama Slim Mode D'emploi page 2

| ©
Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
This symbol is used to indicate safety
instructions or to draw your attention to specific
hazards and risks.
This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
* USB 3.0 Card Reader
* USB 3.0 cable
6 * These operating instructions
3. Safety Instructions
he product is intended for private, non-
commercial use only.
+ Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
* Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
* Do not drop the product and do not expose it to
any major shocks.
* Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
* Do not open the device or continue to operate it
if it becomes damaged.
* Dispose of packaging material immediately
according to locally applicable regulations.
* Do not modify the product in any way. Doing so
voids the warranty.
* Keep this product, as all electrical products, out
of the reach of children!
4
5558
=
4. System Requirements
The multi Card Reader supports the following
operating systems:
e Windows XP / Vista / 7 18
* Mac OS 9.x or higher
5. Product Features
The product supports the following memory cards:
+ SD/SDHC / SDXC
* microSD / microSDHC / microSDXC / miniSD* /
miniSDHC*
e MMC/ MMCplus / RS-MMC* / MMCmobile*/
MMCmicro*
• М5 / М5 Pro / MS ProDuo / M2*
* CompactFlash Type |
*only with adapter (not included)
6. Getting started
* The USB 3.0 multi Card Reader is backwards
compatible to USB 2.0 and USB 1.1.
* No additional drivers are needed. The
installation runs automatically.
©
* Connect the included USB 3.0 cable to the multi
Card Reader.
* Connect the free connector of the USB cable to a
free USB port at your computer.
Plug your memory card into the appropriate slot
of the multi Card Reader. You can now run the
data transfer between your computer and the
memory card.
It is also possible to transfer data between two
memory cards which are plugged simultaneously
into the same Card Reader.
©
22.11.13 10:4