Irradio STV-IR-2242-FIX Guide D'assemblage page 6

wall
TV
wall
TV
main plate
Removing the TV from the wall mount
To remove your TV from the wall plate assembly, disconnect all cables and then reserve the proce-
dures.
Care and maintenance
As a good practice of care and maintenance, carry out periodic checks on the tightening of the an-
chors and check the integrity of the product.
(figure 3)
(figure 4)
Adjust the carrier arms and the screws to the match the holes
on the back of your TV (Figure 4) and fix the screws with the
screwdriver (Figure 5).
Hang your TV on the wall in figure 6 and complete the installa-
tion (Figure 6).
(figure 6)
Fix the main plate to the wall with
triphone screws, use a screwdriver
during the process (Figure 3).
(figure 5)
ATTENTION!
Screwdriver and drill aren't included.
The product is automatically locked,
the carrier arm cannot move when it
comes to the end.