Publicité
STEP 19
With the help of another person, carefully turn your unit
over on its front side as shown. Position back panels as
shown. Align squarely and nail (11) straight into back
edges as shown.
Attach after bottom two back panels are on.
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A
STRUCTURAL PART OF THIS UNIT
11
AND MUST BE INSTALLED
PROPERLY.
(x64)
#A21110
raw surface shown
O
raw surface shown
N
raw surface shown
N
Be sure bottom edge of back
panel is flush with bottom edge.
26
Assure that your unit is
square. Distance from
corner to corner must
be equal as shown
Publicité
