Etac Immedia PediTurn Soft Mode D'emploi page 10

Notice
Special features
Always check the product before use and after washing.
Never use a defective product. If the product shows signs of
wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers. For further
information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual
handling is smooth, always plan the manual handling in
advance.
Material and cleaning
Material:
PediTurn Soft
Top side: Polyester, TPE
Inner surface: Nylon
Back side: Polyester, TPE
Connector disc: Polyamide.
PediTurn Hard
Top and back side: ABS/TPU
Inside: HDPE
Assembling: Brass, Steel.
The product should be checked regularly, preferably each time
it is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.
Never leave the product on the floor after use.
Always conduct a risk assessment, and ensure that the
assistive product can be used for the individual user
and, in combination with other devices, that it is safe
for the user and carers.
Extra care is advised when using PediTurn with spastic
users.
Do not take PediTurn apart – For safety reasons, if the
components are taken apart, they may not be put together
again. In such cases, the product must be scrapped.
If in any doubt - please contact Etac.
Washing instructions:
Can be cleaned with a solvent-free cleaning agent with a pH
level between 5-9, or a 70% disinfection solution.
6