Publicité
Les langues disponibles
Les langues disponibles
DO-321A
To activate sleep settings, press on sleep function button
is already set to the Cooling (down) Mode.
The top ventilator will switch automatically to low speed. After one hour the selected
temperature will increase by 1°C, and by 2°C after two hours. After six hours the
appliance will automatically switch off.
The control panel has a memory function that stores the mode last used. This memory
function remains active for as long as the appliance remains on standby (with the
exception of
REMOTE CONTROL
1.
button. For switching the appliance on and off.
2.
button. Use this to select the desired function.
3.
button. Select the desired ventilation speed
4. ▲ button. For increasing the temperature or adjusting
timer.
5.▼ button. For decreasing the temperature or adjusting
timer.
6.
button. Activate of deactivate the sleep setting.
7.
button. Activate or deactivate the automatic timer
function.
Placing Battery in the Remote Control
Slide the cover to open at back. Place two AA-batteries in
the correct position in the remote control. Slide the cover
back into place. Make sure the positive and negative
markers correspond with the markings on the remote
control.
Do not use old and new batteries together. If you are not
going to use the remote control for an extended period
remove the batteries.Always dispose of used batteries in
a responsible manner, give them to a processing firm or waste processing company.
Point the remote control towards the infrared receptor in your appliance. The remote
control has a maximum range of 7 metres.
INSTALLING THE AIR OUTLET
PIPE
1.
Air pipe
2.
Appliance connection adaptor
3.
Wall fitting for outlet pipe
4.
Remote control
5.
Water collection container
mode).
30
making sure appliance
Publicité
