H.Koenig RP412 Manuel D'utilisation page 2

English
Thank you for your purchase of our electric BBQ grill. To use this BBQ properly and
safely, please read the following instructions carefully.
1. CORRECT USE OF ELECTRICITY
 To prevent the risk of electric shock, DO NOT USE the set with broken power
supply wires or broken plug. All repair works must be made by a professional
(authorized distributor). NEVER TRY TO REPAIR the cable or plug by yourself.
Please take the damaged set to your local authorized maintenance center
 Use of an extension cord is not recommended as it may overheat and cause risk
of fire. However, if an extension cord must be used, the cord should be 1.0mm
NO.14AWG standard.
 To prevent overloading and blowing fuses, ensure that no other high power
appliance is plugged into the same socket, or another socket which is connected in
the same circuit.
 DO NOT PUT the cord under the carpet, blankets. Always keep the power cable
away from walkway in room.
 DO NOT TRY TO REPAIR the broken fuse by yourself, the user should take the
set to your local authorized maintenance center to replace it with the new one.
2. SAFETY IN OPERATION
 DO NOT OPERATE this BBQ set near water sources or flammable liquids.
 DO NOT OPERATE this BBQ set on or near any hot surface. (Hot plate, electric
stoves etc).
 Ensure the BBQ set is placed on a stable, secure surface to eliminate the
possibility of tipping over or avoid any water in the set.
This appliance should not be used by children below 8 years of age, physically or
mentally disabled people nor inexperienced individuals; unless they use it under the
strict surveillance and tutoring of an experienced user and have been provided with
detailed usage instructions to ensure a safe usage of the appliance as well as a
realistic risk awareness. Children should never play with the appliance. Cleaning
and maintenance should not be performed by unwatched children.
Always operate this BBQ set from an earthed domestic 220-240V~50Hz power
socket.
Never try to touch the hot surface of this BBQ set before it is cool
down.
1. Take apart the frying pan, scoops and stone plate, clean with a soft damp cloth.
Place your appliance on the level and stable surface.
2. Check that the voltage marked on the product corresponds with your supply voltage.
Ensure the controller is in the "MIN" position before plug in.
Connect the BBQ to the power supply. Turn the switch from "O" TO "-" position for
1.
working, then pre-heating the BBQ set for 5 minutes.
2. As the different heat of cooking request, put your food on the scoop(s) and place
IMPORTANT SAFEGUARDS
PREPARATION BEFORE USE
OPERATION
2
or