Brandt SE2300W Manuel D'instruction page 36

The « Clock » icon appears below the hours.
Turn the Button to adjust the minutes. The minutes that are set
must be between 0 and 59.
Press the « OK+30S » key to finish setting the time.
To change the time, press simultaneously on the keys «
OK+30S » and « STOP » for 2 seconds. The hours and minutes
flash. Press the « OK+30s » key and then turn the button to set
the hour. Then press « OK+30S » to confirm. Repeat the
operation for the minutes and press « OK+30S » to finalise the
time chosen.
Microwave cooking
Microwave Power Chart
Power
Screen display
Press the « Power « key. The figure « 800 « and the « Power «
and « Cooking 800 W « icons appear.
Press again on the « Power « key or turn the button until the
required power is obtained, from 80 W to 800 W.
Once selected press the « OK+30S « key to confirm.
Then turn the button to select the cooking time (from 0:10 seconds
to 95:00 minutes)
Press the « OK+30S « key to confirm. The « Power « icon flashes.
You can add + 30 seconds by pressing the « OK + 30S « key during
the cooking cycle.
Note:
The duration setting intervals are the following:
10 s---2 min: 10 seconds
2---10 min: 30 seconds
10--- 20 min: 1 minute
20---95 min: 5 minutes
800 W 640 W
800 640
400 W
400
36
240 W 80 W
240 80