XO Appliance XOV30SC Mode D'emploi page 13

installation
1
A
A
B
2
MOUNT TO THE WALL:
Drill the holes A respecting the distances
3
indicated (Fig.1). Fix the appliance to
the wall and align it in horizontal posi-
tion to the wall units. When the appli-
ance has been adjusted, definitely fix
the hood using the screws A (Fig.3). For
the various installations use screws and
screw anchors suited to the type of wall
C
(e.g. reinforced concrete, plasterboard,
etc.). If the screws and screw anchors are
provided with the product, check that
they are suitable for the type of wall on
which the hood is to be fixed.
A
INSTALL THE DUCT COVER:
Adjust the width of the support bracket of the upper flue (Fig.2). Then fix it to the ceiling
using the screws A (Fig.3) in such a way that it is in line with your hood and respecting
the distance from the ceiling indicated in Fig.1. Connect the flange C to the air exhaust
hole using a connection pipe (Fig. 3). Insert the upper flue into the lower flue. Fix the
lower flue to the hood using the screws B provided (Fig.3), extract the upper flue up to
the bracket and fix it with the screws B (Fig.2).
IMPORTANT - The range hood must be secured to wall studs or use drywall
anchors capable of supporting 75 lbs.
- 13 -