Publicité
Les langues disponibles
Les langues disponibles
CONNECTING POWER
The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature.
When power is connected, the clock display will flash '2' which is TIME ZONE 2
(Eastern time) and the default TIME ZONE setting. The correct time will be displayed,
unless you are in another time zone.
To select TIME ZONE 2 (Eastern time) as your default time zone:
• Press
ONCE to confirm your selection.
To change your time zone upon setup:
/
• Press
confirm your selection.
To change your time zone after setup:
• Press and hold the SNOOZE/SLEEP/DIMMER button until numbers flash.
• Press
/
confirm your selection.
There are 8 programmed times zones:
Zone 0 - Newfoundland time
Zone 1 - Atlantic time
Zone 2 - Eastern time (default)
BATTERY BACKUP
This alarm clock is equipped with a battery backup feature. This feature will restore your
alarm clock settings in the event of a power outage. The 3V, CR2032 Flat Lithium battery
is pre-installed at the factory, however, should you need to replace the battery, please
read the following instructions.
OPERATING INSTRUCTIONS
until your own time zone appears on the display; press
until your own time zone appears on the display; press
Zone 3 - Central time
Zone 4 - Mountain time
Zone 5 - Pacific time
- 12 -
ONCE to
ONCE to
Zone 6 - Alaska time
Zone 7 - Hawaiian time
Publicité
