Publicité
Les langues disponibles
Les langues disponibles
Please consult the Troubleshooting chart below before communicating with
MAGNASONIC Customer Support.
SYMPTOM
GENERAL
Power does not come on
RADIO
No Sound
Noise or sound distorted
on AM or FM
SYMPTOM
CLOCK
Incorrect Time
Alarm does not turn on
No display
1. Disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Clean only with a dry cloth.
TROUBLESHOOTING
POSSIBLE CAUSE
AC cord not plugged in
Power is not on
VOLUME control at minimum
position
AM-interference from traffic
FM-antenna wire not extended Extend antenna wire
POSSIBLE CAUSE
Clock not set
Battery is inserted incorrectly,
or depleted
Alarm is not set to turn on
Clock is not set
Alarm time is not set
Dimmer is set to Standby Mode Press Dimmer button
CARE AND MAINTENANCE
- 20 -
POSSIBLE SOLUTION
Insert plug firmly into AC outlet
Press the
button
Turn the VOLUME control up
Tune the radio for better AM reception
POSSIBLE SOLUTION
Set the clock
Check/replace the battery
Activate ALARM 1
or ALARM 2
Set the clock
Set alarm time for ALARM 1 or ALARM 2
Publicité
