Publicité
Les langues disponibles
Les langues disponibles
English
Assembling and Disassembling the Kebbe Attachment
1. Proceed in the same way as when assembling the meat grinder, only with
the difference that instead of the grinding blade and the grinding disc,
only conical ring and nozzle are used.
2. Place the kebab moulder attachments and complete the entire kebab
maker assembly by screwing the threaded ring on to the mincer head.
Place the removable tray on to the feed tube.
3. Attach the attachment to the food processor in the same way as
described in point 6 in chapter Assembling and disassembling the meat
grinder.
4. When disassembling, first remove the removable tray. Then press the lock
button and remove the attachment by turning it clockwise. After removing,
put the cover back in its place.
5. When disassembling the attachment into its individual parts, proceed in
the reverse sequence.
Using the Kebbe maker Attachment
1. Make sure that the food processor is correctly assembled and that the
speed control knob is set to the OFF position. Insert the power plug into a
power socket.
2. Place the prepared kebab meat mixture on to the tray. Use the speed
control knob to set the desired speed. We recommend to initially set the
lowest speed and then increase it as required. Using the pusher, push the
mixture through the feed tube. The result will be a hollow meat tube that is
then cut into smaller pieces. The kebab is a traditional meal from the
Middle East made predominantly from ground meat and whole grain
wheat.
3. To turn the appliance off, set the speed control knob to the OFF position.
Clean out the individual parts of the attachment after each use.
12
Instructions for use
Publicité
