Publicité
Inrush current
I mains (A)
I max
1/2
max/2
BY120P
LED105S
PSU
0.32
Inom (A)
Imax(A)
40
Tref(µs)
600
MCB
B-16A
6
C-16A
8
-- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the
national requirements.
-- Turn power off before inspection, installation or removal.
-- Before using, external earthing is must required. Earthing is also must required in its whole life.
-- The Luminaire must be used within the applicable product specifications, installation instructions and environmental conditions
for storage & operations according to application guidelines provided by Signify for product Warranty to be valid.
-- The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc must be avoided during the use and
storage.
-- The manufacturer will not take responsibility caused by improper use or self-modifications of the product.
-- If the external flexible cable or cord of this luminaire is damaged. It shall be exclusively replaced by the manufacturer or his
service agent or a similar qualified person in order to avoid a hazard.
-- For Indoor use only. This product is not suitable for cold storage areas where obvious temperature gradients are present, such
as ventilation opening, door, etc.
--
Installer needs to arrange Chain / Pipe for mounting. The default product is supplied with a mounting hook
-- The height between luminous surface and ground suggested be more than 5m; the height between bottom of luminaire and
mounting surface must be more than 0.3m.
-- Similar installation or application like flood and tunnel luminaires are NOT allowed.
-- Not suitable for use in harsh vibration and often causing vibration or swinging environment. Also, not suitable for area prone
to hurricane and extreme winds.
-- If customer require the luminous surface levelness<1°,the pipe mounting method is recommended, and suggest to use
gradienter to precisely measure and adjust.
-- Periodic cleaning of the luminaire optical lens cover will ensure maximum optical efficiency.Luminaire shall be cleaned with a dry
soft cloth only.
-- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified
person.
-- The control gear contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified
person.
-- This product contains a light source of energy efficiency class: C.
--For use in environments where an accumulation of conductive dust on the luminaire may be expected.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
I nom.
Time (us)
Tref
BY120P
BY121P
BY122P
LED150S
LED200S
LED250
PSU
PSU
PSU
0.45
0.60
0.75
54
40
40
600
600
750
Maximum number of luminaires
6
6
6
8
8
8
BY120P
0.33
Inom (A)
Imax (A)
53
Tref (µs)
650
MCB
Maximum number of luminaires
C-1 6 A
13
BY122P
BY121P
BY121P
LED300S
LED105S
LED150S
PSU
PSD
PSD
Electrical characteristics
0.92
0.34
0.49
54
53
750
300
300
6
8
8
13
3/6
BY121P
BY122P
Electrical characteristics
0.65
0.81
53
60
650
750
13
8
BY121P
BY122P
LED200S
LED250
PSD
PSD
0.64
0.80
53
53
60
300
600
8
8
6
13
13
8
BY122P
LED300S
PSD
0.81
60
600
6
8
Publicité
