mirastudios Q011 Instructions D'installation

Dresser Wall Mounting Instructions
A
2 x Bracket
Stud
Step 1
A. Locate a stud in the wall behind the dresser. {The stud is the solid wood piece that supports the wall-
you must screw into a solid support, and not directly into drywall.} Position a bracket (A) on the stud
slightly below the top of the furniture. Mark and drill a hole into the center of the stud using a 3/32" drill
bit. Attach the bracket to the stud with the long screws (B).
B. Move the dresser to its final position against the wall and mark the location of the wall bracket on the
back of the furniture. Move the dresser away from the wall and place a bracket (A) on the mark. Mark
and drill holes for the screws using a 3/32" drill bit. Attach the bracket to the top of dresser using the
short screws (C).
C. Move the dresser to its final position, and align the bracket on the furniture with the bracket on the
wall. Thread the strap (D) through the bracket as shown, and tighten until snug. Do not overtighten.
B
2 x Long Screw
C
2 x Short Screw
(A) Bracket
(B) Long Screw
Drywall
Step 3
D
Strap
(A) Bracket
(D) Strap
(C) Short Screw
Back Panel
Step 2
Q011
Top