Publicité
NOTE: if installing more than 1 fan, be careful not to mix blades & screws as each model is
designed with specific materials & parts.
2.5. BLADE ASSEMBLY
Insert the blades through the motor housing's side slots
and align them with the 3 holes.
Secure the blades with 3 blade screws and ensure that
the 3 blade screws are tightened properly. Do not over
tighten the screws as this can damage the blades.
Repeat this process for all blades.
FIG 10
2.6. INSTALLING THE LED LIGHT AND GLASS
SHADE
Connect the LED light's wires to the fan motor's wires.
Align the lamp holder's screw holes with those on the
motor and attach both parts by means of the screws
provided.
FIG 11
ENGLISH
Publicité
