Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS:
1.
SCREW TUBE#1 SECURELY ONTO BASE. PULL WIRE OUT THROUGH BASE.
2.
SCREW TUBE#2 SECURELY INTO TUBE #1. PULL WIRE OUT THROUGH BASE.
3.
SCREW TUBE#3 INTO TUBE #2. PULL WIRE OUT THROUGH BASE.
4.
SCREW TUBE#4 INTO TUBE#3. PULL WIRE OUT THROUGH BASE.
5.
AS THERE IS EXCESS ELECTRICAL CORD BETWEEN THE TUBE#4 AND TOP TUBE,
THIS EXCESS CORD SHOULD BE PUSHED INTO THE TOP TUBE AND TUBE#4. THEN
SCREW TOP TUBE INTO TUBE#4.
6.
PLACE SHADE OF THE FLOOR LAMP ON THE TOP OF SOCKET ASSEMBLY.TIGHTEN
SHADE TO SOCKET WITH SOCKET RING UNTIL SECURE.
7.
ATTACH THE SHADE OF THE GOOSENECK LAMP TO THE SHADE CUP BY
INSERTING IT INTO THE SHADE CUP AND TWISTING TO LOCK IT IN POSITION.
SOCKET RING
SHADE
SOCKET
SOCKET ASSEMBLY
TOP TUBE
SHADE CUP
SHADE
TUBE #4
TUBE #3
TUBE #2
TUBE #1
BASE
Page 3
Publicité
