> Before Start
> Part Names
Copying music with "X-DAP Link"
Playback
1
2
8
All manuals and user guides at all-guides.com
> Initial Setup
> Playback
3
Advanced Setup | Supplementary Information | Others
You can copy music files stored on your computer to the
built-in storage on this unit or to a micro SD card in this unit,
then listen to the music through the "Library" (P12). You can
copy either using the data copying software "X-DAP Link"
or by dragging and dropping (P11).
0 X-DAP Link is compatible with Windows
®
bit), Windows
8/ 8.1 (32 bit/64 bit), and Windows
bit/64 bit).
0 To copy to a micro SD card, insert a micro SD card into
the card slot (P5).
0 When removing the micro SD card, unmount the micro
SD card before removing it (P28).
0 NTFS format micro SD cards are not supported on this
unit.
Install [X-DAP Link] on your computer
This unit supports X-DAP Link versions 1.2.0 and later.
When using version 1.2.0 or earlier, install the latest version
before continuing.
Perform the following procedure when the unit is on.
1. Start your computer and download the installer for X-
DAP Link from the following site.
http://www.jp.onkyo.com/audiovisual/portable/dap/
license.htm
Double-click "setup.exe" to install. Follow the on-screen
instructions to install. A shortcut is created on the
desktop after installation.
2. Connect this unit to a computer with the supplied micro
USB cable. Connect so the wider side of the plug is down
when inserting into this unit's micro USB port. You may
damage the plug or jack if you try to insert it the wrong
way.
Do not tap "Unmount", displayed on this unit's screen,
until copying is complete. If you do tap it, unplug the
micro USB cable, then connect it again.
®
10 (32bit/64
®
7 (32