A.E.B. 552 Mode D'emploi page 8

Technical Specifications
The safety car, enables the GAS solenoid valves only with the engine running.
This means that if the engine was accidentally stopped, the GAS supply would
automatically be cut off.
We advise you to fix the Safety Car in a vertical position, away from
possible water infiltrations and excessive heat sources ( for example:
exhaust manifolds), so as to avoid to irreparably damage the Emulator.
To avoid bad workings of the Safety Car we advise you to pass the
wires away from the high tension wire;
- make good connections. Please, pay attention that the best
connection you can do is a duly insulated welding.
Do not absolutely open the Safety Car box, especially when the engine
is running or the board panel is inserted. A.E.B. srl declines every
responsabilities for damages caused to things or person which
derive from the tampering of its own device provoked by
unauthorized persons.
SAFETY DEVICE
General Direction
English
IS 552 REV. 130697-0