Publicité
Les langues disponibles
Les langues disponibles
Installing and Removing Flat Panel Screen
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the screen.
Attach mounting plate (B) to wall plate (A) by sliding flanges of mounting plate (B) into hook flanges of wall plate (A).
3
Secure mounting plate to wall plate using two M5 x 12 mm phillips screws (C) through bottom flanges of wall plate
(A) and into bottom flanges of mounting plate (B) as shown. Tighten screws securely.
To remove screen from mount, remove screws (C) and lift screen off of mount.
C
WARNING
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount.
B
A
7 of 21
CAUTION
B
FLANGES
A
HOOK
FLANGES
ISSUED: 11-19-07 SHEET #: 202-9247-3 3-24-08
Publicité
