BH FITNESS G818RBM Instructions De Montage Et Utilisation page 17

Attach the front (79) and back (80) covers using the
screws (123), (138), Fig.11.
Move the lower tray (5) up, attach the upper tray (85)
and fix the trays using the joints (122) and the screws
(123), (138), Fig.12.
LEVELLING.-
Once the unit has been placed into its final position,
make sure that it sits flat on the floor and that it is level.
This can be achieved by screwing the adjustable feet
(49) up or down, as shown in Fig.13.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (7), as shown in
Fig.14, which make it easier to move.
The two wheels at the front of the unit make it easier to
place the unit in to any chosen position by lifting the
rear slightly.
Store your unit in a dry place, preferably not subject to
changes in temperature.
MAINS CONNECTION.-
Insert the jack for the transformer into the connection
hole on the main body (bottom, rear of the machine)
and then plug the transformer (117) into a 230 V main
supply, Fig.14.
Do not hesitate to get touch with the Technical
Assistance Service if you have any queries by phoning
customer services (see last page in manual)
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR NOTICE.
17