Assembly Instructions
1
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have
your owner's manual and model number available for
reference.
Note: The model number can be found on the back or side of the grill.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
• Clear an area large enough to layout all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in "Operating Instructions" section)
• (1) 14.1 oz or (1) 16.4 oz LP gas tank.
Typical assembly: approximately 30 minutes.
3
Attach Axle, Wheels and Hub Caps
B
x 2
Outdoor LP Gas Barbecue Grill Model No. GTC1000W-C
G
x 2
2
Attach Lid Handle and Top Hinges
A
x 4
C
D
x 10
4
Attach Heat Plate Supports
A
x 4
C
D
x 4
E
x 4
x 6
F
x 6
E
x 4
x 4
F
x 4