Télécharger Imprimer la page

Publicité

Liens rapides

first_column cabinet
b a t h f i n d i n g s
CL/07.36130, CL/07.36131, CL/07.36140, CL/07.36144
Montage instructies
Installation Instructions
Notice de montage
Montageanweisungen

Publicité

loading

Sommaire des Matières pour clou First CL/07.36130

  • Page 1 first_column cabinet b a t h f i n d i n g s CL/07.36130, CL/07.36131, CL/07.36140, CL/07.36144 Montage instructies Installation Instructions Notice de montage Montageanweisungen...
  • Page 2 All menti- oned dimensions in this manual should be verified before executing the action. - Clou b.v. can not be held responsible for the results of improper use, improper transportation or any damage caused during interim storage.
  • Page 3 à toute action. - Clou BV ne peut être tenu responsable pour usage non approprié des articles, trans- port inadéquat ou dommage causés à votre entrepôt en attente de livraison.
  • Page 4 Gegenstände auf das Produkt passend ist. Gebruiksvoorschriften: zie ook de onderhoudsvoorschriften op www.clou.nl max. User’s instructions: See also the maintenance guides at www.clou.nl 40 kg Instructions d’utilisation: Voyer aussi les instructions de maintenance sur www.clou.nl Gebrauchsanweisungen: Sehen Sie auch die Wartungsanweisungen am www.clou.nl...
  • Page 6 Indien de kolomkast staand op de grond wordt geplaatst dient men eerst de plint op de gewenste zijde te schroeven. If the column cabinet is used standing the plinth has to be screwed to the desired side. Si le colonne est usée posant le plinth doit être vissé...
  • Page 7 Duidt met potlood en waterpas de gewenste hoogte X van de kolomkast aan. Mark with pencil and level the prefered height X of the column cabient. Marquer avec un crayon et au niveau la hauteur souhaitée X du colonne. Markieren Sie mit einem Blei- stift und mithilfe der Wasser- waage die gewünschte Höhe X des Kabinet.
  • Page 8 Boor de gaten voor de beugels (ø 8 mm). Drill the holes for the supports (ø 8 mm). ø 8 mm Percer les trous pour les sup- ports (ø 8 mm). Bohren Sie die Löcher für die Bügel (ø 8 mm). Steek de pluggen in de gaten.
  • Page 9 Bevestig de haaklat aan de muur met de sluitringen en schroeven. Attach the mounting profile to the wall with the washers and screws. Attacher le profil de support au mur avec les rondelles et les vis. Bringen Sie das Montageprofil zur Wand mit den Unterleg- scheiben und den Schrauben Haak de kolomkast over de...
  • Page 12 Clou bv Thermiekstraat 1 NL-6361 HB Nuth T +31 (0)45 524 56 56 F +31 (0)45 524 60 00 info@clou.nl www.clou.nl...

Ce manuel est également adapté pour:

First cl/07.36131First cl/07.36140First cl/07.36144