Publicité
Les langues disponibles
Les langues disponibles
Equipotential bonding
8 Drain for condensation water
> In case the power cable must be changed use a
cable that matches your local standards.
The exchange of the power cable may only be
carried out by the manufacturer, his service
agents or similar qualified personal.
NOTE: Physical earth ground
Also on the rear side of the UV PLUS there is a stud
for the equipotential bonding. Integrate the UV
PLUS with a suitable cable into the equipotential
bonding system where used.
On the rear side of the UV PLUS a drain
connection for condensation water is installed
> Fit the silicone hose with the hose clamp to the
elbow.
> Put the drain pipe to the drain of the unit.
> Shorten the silicone hose to the desired length
and connect it to the drain pipe.
EN
13
Publicité
