Publicité
Les langues disponibles
Les langues disponibles
Cable connections
Connector
NOTE: When connecting a device via the Side AV input, you have to use the supplied connection cables
to enable connection.See the illustrations above. | To enable PC audio, you will need to use the supplied SIDE
AV CONNECTION cable's WHITE & RED inputs. | If an external device is connected via the SCART socket, the
TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser
mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend
that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module
only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
You can use the VGA input for connecting a YPbPr device. To do this, you need a YPbPr to PC cable (Not supplied).
Type
Scart
socket
(back)
VGA
Connection
(back)
Audio output digital
(S/P D/F electrical)
(side)
HDMI
Input
(back)
SPDIFF
Connection
(back)
SPDIFF
Side AV
Connection
(side)
Headphone
output
(side)
YPbPr Video
Connection
(side)
USB
port
(side)
Common
Interface
(side)
Cables
(Not supplied)
(Not supplied)
PC Audio Cable
(Not supplied)
Side Audio/Video
Connection Cable
(Supplied)
(Not supplied)
(Not supplied)
(Not supplied)
AV Connection
Cable (supplied)
(Not supplied)
(Not supplied)
YPbPr Connection
Cable (supplied)
- 32 -
Device
CAM
module
Publicité
