Overmax Camspot 3.7 Manuel De L'utilisateur page 18

How to connect the camera to other router?
Why can't the camera identify SD card?
EN
At first log in the application to delete and
reset the device, and then re-configure the
device through the application.
The SD card must be removed from the
device when it is switched off, otherwise
damage to the memory card and/or the
camera motherboard may result.
The process of inserting or removing the
card should be done when the camera is
disconnected from the power source.
Check if SD card works properly and if it is in
FAT32 format. The application will suggest
„cannot find SD card" if the device or mobile
phone network are unstable.
Recommended Internet connection value:
download: 16 mbps
upload: 16 mbps
The memory card must be a minimum of
Class 10 and be suitable for continuous
recording.